ESP32 PICO DevKitM 2

Product overview

ESP32-PICO-DevKitM-2 is an ESP32-based development board produced by Espressif.
The core of this board is ESP32-PICO-MINI-02(02U) module with complete Wi-Fi and Bluetooth functionalities. The development board features a USB-to-UART Bridge circuit which allows developers to connect the board to a computer’s USB port for flashing and debugging.
All the IO signals and system power on ESP32-PICO-MINI-02(02U) are led out to two rows of 18 x 0.1” header pads on both sides of the development board for easy access. For compatibility with Dupont wires, all header pads are populated with two rows of male pin headers
Note:-

1. This pin is connected to the pin of the USB bridge chip on the board.
2. 32.768 kHz crystal oscillator: a) input b) output
3. The operating voltage of ESP32-PICO-DevKitM-2’s embedded SPI flash is 3.3 V. Therefore, the strapping pin MTDI should be pulled down during the module power-on reset. If connected, please make sure that this pin is not held up on reset.

Key Features :

1. The complete ESP32 system on a chip (ESP32 SoC) has been integrated into the module
2. Users can also select the board with ESP32-PICO-MINI-02U soldered
3. V-to-3.3V Low dropout voltage regulator (LDO)
4. CP2102N, single-chip USB-UART bridge that offers up to 3 Mbps transfers rates
5. All the pins on ESP32-PICO-MINI-02 are broken out to pin headers
6. You can program ESP32 to enable multiple functions such as PWM, ADC, DAC, I2C, I2S, SPI
7. Some useful link

Technical specifications

1. On Board chip: ESP32 system on a chip (ESP32 SoC)
2. LDO: V-to-3.3V Low dropout voltage regulator (LDO).
3. USB-to-UART bridge: CP2102N, single-chip USB-UART bridge that offers up to 3 Mbps transfers rates
4. Connectivity Technology: Bluetooth ,Wifi
5. Antenna: On board PCB antenna
6. Flash: 8MB
7. PSRAM: 2MB

What's included

• 1 x ESP32 PICO DevKitM 2.